Protocol Converter RS485 to Ethernet ET-485

Protocol Converter RS485 to Ethernet ET-485

Product Details:

 
Network Types RS-485 Modbus RTU/ASCII, Ethernet (Modbus TCP)
Model Name/Number ET-485
Application RS-485 MODBUS/ASCII to Ethernet conversion
Power Supply 100 - 265V AC, 140 - 375V DC, 7 - 24V DC battery (optional)
Compatible Brand NOVATEK ELECTRO

Modbus RTU/ASCII (RS-485) to Modbus TCP (Ethernet)

ET-485 is a microcontroller unit. It is designed to exchange data over the Ethernet 10BASE-T and 100BASE-T network using the equipment, which is provided with the RS-485 interface and establishing a Modbus network. The standard network mapping using the RS-485 is provided. The unit fulfills the functions of a ‘Modbus Server’ for switching the Modbus clients to the Ethernet network. It redirects the Modbus requests from the clients to the units in the Modbus network and returns their answers to the clients.

ET-485 has:

  • Flexible addressing within the Ethernet network (overloading MAC-address, static and dynamic IP- address)
  • Access protection over the Ethernet network (password for configuration mode, IP- address filter for setting and switching to the Modbus network)
  • Different data transfer modes for Modbus network (RTU and ASCII with/without odd-even check, wide range of transmission speeds, selectable delays)
  • Free PC software for programming/settings and monitoring

Functioning:

32-bit RISC processor with ARM architecture provides data routing between the Modbus RTU/ASCII (RS-485) network and Ethernet (10base-T/100base-T) network. The operating speed and availability of channels for direct access to the memory allows processing the high-speed data flow. Indicators provide information on the connection status and data transfer over the Modbus and Ethernet networks. The "Reset" button allows of restart the unit, without switching it off the mains, or do a factory reset.

The unit has non-volatile memory to save settings. Every unit is provided with a globally unique MAC address (during the production) and can be connected to local networks with a protected access to Internet.

Additional Information:

  • Item Code: ET-485
  • Port of Dispatch: New Delhi, India

Main specifications:

Operating supply voltage, VAC

230

Voltage to maintain normal operation, V

- alternating current

- direct current

-voltage of DC backup power (optional)

 

100 – 265

140 – 375

7 – 24

Supply frequency, Hz

47 – 63

Data Exchange Interface over the Ethernet network

10BASE-T/100BASE-T (twisted pair)

Supported Ethernet protocols

ARP, IP, TCP, Modbus TCP, HTTP

Maximum number of connections over the Modbus TCP protocol

11

Integrated servers

Modbus-server, HTTP-server

Data Exchange Interface over the Modbus network

RS-485

Modbus network exchange modes

Driving (Master) / Driven (Slave)

Supported Modbus protocols

Modbus RTU, Modbus ASCII

RS-485 driver maximum output voltage, V

3.3

RS-485 output current of short circuit driver (limiting), mA

250

RS-485 receiver input current, mA, no more than

0.125

Integrated terminal resistance, Ohm

300

Recommend number of connected units within the Modbus network:

  • when receivers input current of RS-485 bus is doesn’t more 0.125 mA
  • when receivers input current of RS-485 bus is doesn’t more 1mA

 

256, not more

32, not more

Indication

LEDs

Readiness time upon switching the unit to the mains, sec, not more than

1

Rower consumption, VA, not more than

1.2

Weight, kg, at most

0.200

Dimensions, mm

95 Ñ… 52 Ñ… 67

Unit purpose

Communication

Nominal operation condition

Continuous

Cross section of terminals connection wires, mm²

0.5 – 2.5

Terminal screws, N*m

0.4

Level of unit protection:

IP20

Protection class against electrical shock

II

Permissible pollution density

II

Overvoltage category

II

Rated insulation voltage, V

450

Rated impulse withstand voltage, kV

2.5

Operating position

Arbitrary

Pollutants in the amount, which is not to exceed the maximum permissible concentration

None

 

Operating and storage conditions:

Operating temperature, °Ð¡

from minus 35 to +55

Storage temperature, °Ð¡

from minus 50 to +60

Atmospheric pressure, kPa

from 84 to 106.7

Relative air humidity (at 25°Ð¡) non-condensing, %

from 30 to 90


ET-485 meets the following requirements:
IEC 60947-1:2004, ІDТ; ІEC 60947-6-2:1992, ІDT; CISPR 11:2004, IDT; IEC 61000-4-2:2001, IDT.

Please fill the details